							     26-July-1999

              CAMAC Device Driver on Solaris2.x       
                   Release 1.40-50T   


                 Yasuo Takeuchi (ICRR)

                 23-May-1997  modified by Eiji Inoue (KEK)
                 26-Jul-1999  modified by Kouji Takahashi(LHS), Eiji Inoue (KEK)

 **************************************
 ***** FORCE SPARC CPU-50T VERSION *****
 **************************************
     This distribution is a FORCE SPARC CPU-50T version, and it contains
 a CAMAC device driver, a CAMAC library, and three sample programs for
 the SPARC SPARC CPU-50T. The CAMAC functions for SPARC/Solaris2 is fully
 compatible with those for SPARC/SunOS4, and almost compatible with the CAMAC
 drivers on some machines developed at KEK.

     The example programs and the CAMASM/CAMEXE in "camac.sparc-1.22d.tar.gz"
 can be probably used. It is available at the following URLs.
         http://www-sk.icrr.u-tokyo.ac.jp/~takeuchi/camac/
         ftp://online.kek.jp/pub/kek/camac/

     Any comment about the CAMAC driver on SPARC is welcome. Please send it
 via E-mail to "eiji.inoue@kek.jp" and/or "takeuchi@icrr.u-tokyo.ac.jp".


 ************************
 ***** INSTALLATION *****
 ************************
 (0.) connect SPARC CPU-50T, K2917 and K3922, and then install
      the VME device driver according to its manual.

 (1.) check Makefile and compile.
         make

 (2.) Reboot your system
         shutdown
         :
         boot -r

 (3.) copy and load CAMAC device driver.
         su
         make load
         exit

 (4.) execute sample programs.
         cam1
         cam3

 (5.) To remove the CAMAC device driver, type as follows.
         su
         make unload
         exit


 *******************************
 ***** OTHER INFORMATIONS  *****
 *******************************
 Hardware & Software: (our environment)
         FORCE Computers Inc.            SPARC CPU-50T
                                         Solaris2.6 HArdware : 5/98
                                         VME driver V2.3.1
         Kinetic Systems Corporation     K3922-Z1B (CAMAC CC)
                                         K2917-Z1A (VME-CAMAC interface)

 History:
         v1.40-50T Modified Release v1.30-5V for FORCE SPARC CPU-50T.
                   This version of CAMAC driver can also be used under 
		   the Server & Diskless Clients system.

         v1.30-5V Modified Release v1.30 for FORCE SPARC CPU-5V.
                  The CAMAC single action, LAM interruption, block transfer,
                  work well.

         v1.30   test release.
                 under porting from the CAMAC driver for SPARC/SunOS4 v1.22d
                 DMA dosen't work well.

 ==============================================================================
      ͺ       ر γҸ
     Yasuo Takeuchi  Kamioka Observatory, ICRR, Univ. of Tokyo
     TEL:0578-5-9607  FAX:0578-5-2121  E-mail:takeuchi@icrr.u-tokyo.ac.jp
     URL: http://www-sk.icrr.u-tokyo.ac.jp/~takeuchi/

             ⥨ͥ륮®︦浡 γҸҳ˸
     Eiji Inoue      High Energy Accelerator Research Organization,
     Institute of Particle and Nuclear Studies
     TEL:0298-64-1171 FAX:0298-64-2580 E-mail:eiji.inoue@kek.jp
     URL: http://www-online.kek.jp/~inoue/

   ⶶ      ҥ륨å
 Kouji Takahashi    LHS Incorporated,
     Technical Support
   TEL:03-5337-2631 FAX:03-5337-2635 E-mail:k_taka@qa2.so-net.ne.jp
     URL: http://www.lhs.co.jp/

 ==============================================================================

