/*
 * setup.h for K4
 *	Creation date	: Nov 13 2000
 *	Author		: Y.Nakaune
 */

#ifndef __SETUP_H
#define __SETUP_H

/* Comment Out for Your SetUp */
#define ADC_ON
#define VMELIB06_USE

#define ADC_SCI
#define ADC_TGC
#define TMC_DC
#define TMC_TGC
#define TMC_SCI

/*---Beam Test 2000 setup's size ( mm )---*/
#define Height        3000    //---高さ---
#define Xwidth        3000    //---X方向の幅---
#define Zwidth        4000    //---Z方向の幅---
#define z_frame        200    //---余白---
#define Area_Zwidth ( (z_frame) + (Zwidth) + (z_frame) ) 
                             //---余白を加えた高さ---

//---Geometry for SCI (Scintillation counters)---
#define SCI03_X        100    //---Sci0,3の長さ--- 
#define SCI03_Y        100    //---Sci0,3の幅---
#define SCI_Z            5    //---Sci0,1,2,3の厚さ--- 
#define SCI12_X         50    //---Sci1,2の長さ--- 
#define SCI12_Y         60    //---Sci1,2の幅---
#define SCI03_HEIGHT  1550    //---Sci0,3までの高さ---
#define SCI12_HEIGHT  1570    //---Sci1,2までの高さ---
#define SCI_MAX          4    //---Sciの数---

//---Geometry for DC ( Drift Chamber )---
#define DC_X           206    //---DCのX方向の長さ--- 
#define DC_Y           206    //---DCのY方向の長さ--- 
#define DC_Z           100    //---DCのZ方向の長さ--- 
#define DC_HEIGHT     1497    //---DCまでの高さ---
#define DC_MAX           4    //---DCの数---
#define DC_WIRE         36    //---DCの中心からwireまでの距離---
#define DC_Xwire        73    //---DCのX方向のwireまでの距離---
#define DC_Ywire        27    //---DCのY方向のwireまでの距離---
#define DC_CELL        104    //---DCのX,Y方向のCELLの長さ---
#define DC_ZCELL        16    //---DCのZ方向のCELLの長さ---
#define DC_WINDOW      110    //---DCのX,Y方向のwindowの長さ---

//---Geometry for TGC ( Thin Gap Chamber )---
#define TGC_GAP         26     //---TGC間の距離--- 
#define D_T_GAP        170     //---TripletとDoublet間の距離---
#define TGC_Xup       1365     //---TGCのX方向の上の長さ--- 
#define TGC_Xdown     1525     //---TGCのX方向の下の長さ--- 
#define TGC_Y         1250     //---TGCのY方向の長さ--- 
#define TGC_THICK        6     //---TGCの厚さ--- 
#define TGCH_MAX        32     //---TGCのchannnelの数---
#define TGC_MAX          5     //---TGCの数---

//---Geometry for each Detectors--- 
#define SCI0_DC0_GAP   60      //---SCI0とDC0間の距離---
#define DC0_DC1_GAP   10       //---DC0とDC1間の距離---
#define DC1_SCI1_GAP   60      //---DC1とSCI1間の距離---
#define SCI1_TGC_GAP  1290     //---SCI1とTGC間の距離---
#define TGC_DC2_GAP  1065      //---TGCとDC2間の距離---
#define DC2_DC3_GAP  900       //---DC2とDC3間の距離---
#define DC3_SCI3_GAP   58      //---DC2とSCI3間の距離---

#define DC0_DIST       65      //---DC0までの距離--- 
#define SCI1_DIST      335     //---SCI1までの距離--- 
#define TGC_DIST      1625     //---TGCまでの距離--- 
#define DC2_DIST      2748     //---DC2までの距離--- 
#define SCI3_DIST     3906     //---SCI3までの距離--- 

//---Geometry for Wire & Strip of TGC--- 
#define Fst_W         14.5     //---first wireまでの距離--- 
#define Fst_S         14.5     //---first stripまでの距離--- 
#define W_PITCH        1.8     //---wire pitch--- 
#define STRIP_MAX       32     //---strip chの数--- 
#define D_WIRE_MAX      32     //---Doubletのwire chの数--- 
#define T_WIRE_MAX      24     //---Tripletのwire chの数--- 

/*---conversion factor from measurement_value to standard_value---*/
#define CENTER_X      -653     //---center X postion of TGC when stage is minimum.
#define CENTER_Y       -32     //---center Y postion of TGC when stage is minimum.
#define SCALE_ERROR_X  200     //---stage position when stage is minimum.
#define SCALE_ERROR_Y   80     //---stage position when stage is minimum.

/*---TGC Configuration---*/
#define TGC_LAYER	5
#define TGC_CH	       32
#define W_S		2	// Don't change the value

/*---SCI Configuration---*/
#define SCI_NUMBER	4

/*---DC Configuration---*/		
#define DC_NUMBER	4       // Don't change the value 
#define DC_XY		2	// Don't change the value

/*---X-T relation---*/
#define T0		2600		// by TMC count
#define DTTMC_CUT	0		// by TMC count
#define DRIFT_VEROCITY  0.044           // mm/nsec	       

/*
 * VME TMC Configuration
 *   ex.)
 *	TMC_MOD		3
 *	TMC_ADDR        0x800000L
 *	ADDR_STEP       0x10000L
 *	-----------
 *	The VME address of the TMC Modules are
 *	 0x800000
 *	 0x810000
 *	 0x820000
 */

#define TMC_MOD	        10	
#define TMC_ADDR        0x800000
#define ADDR_STEP       0x10000
#define CSTSP		0	// Common Stop(=0) or Start(=1)
#define EDGE		1	// Edge Detection (0=both, 1=rising, 2=falling)
#define TIMERANGE       40	// Recoring depth (25ns/row, 1-126 rows)
#define DISP		100	// Display Channel (Ch=0-31,All=99,None=100)

#define USE_TMC_DC      1       // flag for use TMC DC 
#define MOD_DC          9       // module number for DC 
#define TIMERANGE_DC    125	// Recoring depth for DC (25ns/row, 1-126 rows)

#define TMC_CH		32
#define TMC_FACT	0.78
#define TMC_OF		-1000.

/*---CAMAC ADC---*/  
#define  ADC_MOD        5
#define  ADC_CH        16

/*---VME Interupt Register Configuration---*/
#define INTREG_ADDR	( (caddr_t)0x8000 )

/*---VME CAEN HV System Interface V288 Configuration---*/
#define V288_ADDR	( (caddr_t)0x10 )
/*---Configuration value for SY127 Crate Number---*/
#define	CRATE_NUMBER	1

#endif
/*  End of File  */